Accessories

Accessories for modular pipe support systems – threaded rods, hexagonal nuts, screws, bolts, adapters and washers

All prices discounted net

Overview
More details

An error occurred

Unfortunately, products matching your chosen category can not be loaded, due to technical issues. Please try again later. Thank you for your understanding.

No products matching your requirements

Unfortunately, there are no products matching your requirements. Please udpate or reset your applied filters.

AM

Threaded rod 4.8

Material composition: Steel grade 4.8 - DIN 976-1
Surface finish: Galvanized

From RUB82,19

Compare (1)

AM

Galvanized threaded studs with 4.6 steel grade used as an accessory for various applications

Material composition: Steel grade 4.6
Surface finish: Galvanized

From RUB12,01

Compare (1)

Hexagon nut grade 8 DIN 934

Material composition: Steel grade 8
Surface finish: Galvanized

From RUB195,00

Compare (1)

Galvanised flat washer ISO 7089

Galvanized flat washer corresponding to ISO 7089

Material composition: Steel - DIN EN ISO 7089
Surface finish: Galvanized

From RUB171,00

Compare (1)

Material composition: Steel - DIN EN ISO 7093-1
Surface finish: Galvanized

From RUB289,00

Compare (1)

Flat washer similar to ISO 7089

Material composition: Steel
Surface finish: Galvanized
Load range: Medium-duty

From RUB385,00

Compare (1)

Galvanized hexagon screw corresponding to DIN 933

Material composition: Steel grade 8.8
Surface finish: Galvanized
Load range: Medium-duty

From RUB11,93

Compare (1)

AM

Hot-dip galvanized (HDG) threaded rod with 4.8 steel grade used as an accessory for various applications

Material composition: Steel grade 4.8
Surface finish: Hot-dip galvanized
Base material type: n/a

From RUB293,13

Compare (1)

HDG grade 8 hexagon nut DIN 934

Hot-dip galvanized (HDG) grade 8 hexagon nut corresponding to DIN 934

Material composition: Steel grade 8
Surface finish: Hot-dip galvanized - DIN EN ISO 10684
Base material type: n/a

From RUB739,00

Compare (1)

HDG flat washer ISO 7089

Hot-dip galvanized (HDG) flat washer corresponding to ISO 7089

Material composition: Steel - DIN EN ISO 7089
Surface finish: Hot-dip galvanized

From RUB754,00

Compare (1)

Hot-dip galvanized (HDG) flat washer corresponding to ISO 7093 used in various applications

Material composition: Steel - DIN EN ISO 7093-1
Surface finish: Hot-dip galvanized

From RUB1 056,50

Compare (1)

A2 hexagon nut DIN 934

Stainless steel (A2) hexagon nut corresponding to DIN 934

Required material grade: A2
Material composition: Stainless steel A2-70
Surface finish: Stainless steel

From RUB1 233,00

Compare (1)

A4 hexagon nut DIN 934

Stainless steel (A4) hexagon nut corresponding to DIN 934

Required material grade: A2, A4
Material composition: Stainless steel A4-70
Surface finish: Stainless steel

From RUB1 582,50

Compare (1)

Stainless steel (A2) flat washer ISO 7089

Stainless steel (A2) flat washer corresponding to ISO 7089

Required material grade: A2
Material composition: Stainless steel A2 – DIN EN ISO 7089
Surface finish: Stainless steel

From RUB777,00

Compare (1)

Stainless steel (A4) flat washer ISO 7089

Stainless steel (A4) flat washer corresponding to ISO 7089

Required material grade: A2, A4
Material composition: Stainless steel A4 – DIN EN ISO 7089
Surface finish: Stainless steel

From RUB615,00

Compare (1)

Stainless steel (A4) flat washer corresponding to ISO 7093 used in various applications

Required material grade: A2, A4
Material composition: Stainless steel A4 – DIN EN ISO 7093-1
Surface finish: Stainless steel

From RUB1 771,50

Compare (1)

Stainless steel (A4) flat washer similar to ISO 7089 used in various applications

Required material grade: A2, A4
Material composition: Stainless steel A4
Surface finish: Stainless steel

From RUB111,81

Compare (1)

A4 hexagon screw DIN 933

Stainless steel (A4) hexagon screw corresponding to DIN 933

Required material grade: A4
Material composition: Stainless steel A4-70 - DIN EN ISO 3506-1
Surface finish: Stainless steel

From RUB1 225,00

Compare (1)

HDG hexagon screw DIN 933

Hot-dip galvanized (HDG) hexagon screw corresponding to DIN 933

Material composition: Steel grade 8.8
Surface finish: Hot-dip galvanized
Load range: Medium-duty

From RUB715,50

Compare (1)

GA

Galvanized thread adapters to connect various internal and external thread diameters

Material composition: Steel grade 4.6
Surface finish: Galvanized

From RUB3 505,00

Compare (1)

GR-G

Galvanized threaded pipe with 4.6 steel grade used as an accessory for various applications

Material composition: Steel grade 4.6
Surface finish: Galvanized
Length - L: 2000 mm

From RUB4 456,91

Compare (1)

GR-G-F

Hot-dip galvanized (HDG) threaded pipe with 4.8 steel grade used as an accessory for various applications

Thread - M: 1-1/4 in
Material composition: Steel grade 4.6
Surface finish: Hot-dip galvanized

RUB25 321,50

Compare (1)

Galvanized hanger bolt with steel grade 4.6 and Torx head

Material composition: Steel grade 4.6
Surface finish: Galvanized

From RUB16,41

Compare (1)

M12-F

Hot-dip galvanized (HDG) hexagon bolt used in various applications

Thread - M: M12
Material composition: Steel grade 8.8
Surface finish: Hot-dip galvanized, 45 µm

From RUB6 811,60

Compare (1)

RA

Galvanized pipe hangers

Thread - M: M8
Material composition: Malleable cast iron
Surface finish: Galvanized

RUB2 784,50

Compare (1)

Galvanized hexagonal spacer coupling for extending threaded rods

Surface finish: Galvanized

From RUB693,00

Compare (1)

Stainless steel (A4) spacer coupling for extending threaded rods

Required material grade: A2, A4
Material composition: Stainless steel A4-70
Surface finish: Stainless steel

From RUB9 360,50

Compare (1)

Round spacer coupling

Hot-dip galvanized (HDG) spacer coupling for extending threaded rods

Approvals: GL approved (19375-11HH)
Material composition: Steel grade 4.6
Surface finish: Hot-dip galvanized

From RUB35,45

Compare (1)

SR-RM

Galvanized reduction sleeves used to reduce the diameter of threaded rods

Material composition: Steel
Surface finish: Galvanized

From RUB6 817,00

Compare (1)

M-TSH-Z

Punch to create two holes at once in a trapezoidal metal sheet

Material composition: Malleable cast iron
Surface finish: Powder coated
Base material type: n/a

From RUB1 231,96

Compare (1)

MW-MX

Galvanized angles to increase stiffness while supporting pipe rings in riser shafts

Material composition: S235JR - DIN EN 10025
Surface finish: Galvanized
Load range: Medium-duty

From RUB685,70

Compare (1)

Washer LW M16 New

Locking washer

Material composition: Steel C 60 - DIN EN 10132-3
Surface finish: Zinc flake
Inside diameter - DI: 16.4 mm

RUB5 800,00

Compare (1)

MF-SKD

Galvanized pivot anchors for use in trapezoidal metal sheets

Material composition: Carbon steel
Surface finish: Galvanized
Base material type: Trapezoidal sheet

From RUB3 012,00

Compare (1)

MQZ-A-F

Hot-dip galvanized (HDG) pipe ring saddle adapter for converting the diameter of threaded rods

Material composition: 11 SMn 30 - DIN EN 10087
Surface finish: Hot-dip galvanized, 56 µm - ASTM A153
Wrench size - W: 19 mm

RUB13 032,00

Compare (1)

MQZ-A-R, MGA-R

Stainless steel (A4) pipe ring saddle adapter for converting the diameter of threaded rods

Required material grade: A4
Material composition: Stainless steel, 1.4401 (A4) - EN 10088, AISI 316
Surface finish: Stainless steel

RUB31 157,50

Compare (1)

BS

Galvanized flat leaf screw used for various applications

Material composition: S235JR - DIN EN 10025
Surface finish: Galvanized
Thread length - L: 40 mm

From RUB2 065,50

Compare (1)

MRC

Tool to easily cut threaded rods of various diameters

Material composition: Steel
Surface finish: Painted

From RUB4 238,77

Compare (1)

MZN-400

Zinc spray

Content per can/cartridge: 400 ml
Material composition: Zinc (> 90%)
Surface finish: Zinc-like shine

RUB1 333,49

Compare (1)

Back to products ()

Compare

Products ()

Added to cart

Go to shopping cart

Update of quantity

Please note, the order volume has been updated. This is due to package and minimum order quantities.

Please note, the order volume has been updated to . This is due to package and minimum order quantities.

Hilti = registered trademark of Hilti Corporation, 9494 Schaan, Liechtenstein
© 2009-2016, Right of technical and program changes reserved, S.E. & O.

Hilti Russia
Service Hotline: 8 (800) 700-52-52